s.abels 
Nanoparticles are particles with a size (height, width or length) of 1 to 100 nm (nanometers). To clarify the size: A nanometer is one millionth of a millimeter.
“Nano” is derived from the Greek term nanos and means dwarf. This refers to the small size of the particles.
The abbreviation TRGS stands for Technical Rules for Hazardous Substances and are a fundamental element of occupational health and safety. These rules specify the application of the Hazardous Substances Ordinance.
Such a risk assessment is always necessary if pollutants may be present at the workplace. The employer has a duty to protect employees from potential health hazards.
GSA ‘s FSP2 personal sampling system is equipped with a cyclone. This is a licensed sampling system that is used, for example, for particle measurements of dust fractions of A-dust or E-dust at the workplace in order to determine the dust load there.
Measuring dust exposure at the workplace is always useful when occupational limit values must be complied with.
GSA indoor air measuring devices reliably detect the presence and harmful quantities of solvents in the home. If, for example, an unpleasant odor develops in the course of new furniture or other furnishings, or if symptoms only occur in one room, there may be solvent pollution.
The GSA measuring device SG350ex is particularly suitable when it comes to escaping gases. These room air measuring devices therefore provide more information about the gases present in the room under investigation.
The measuring device SG5200 can be used to measure various hazardous substances, including mold. The SG5200 can be used both for personal sampling, such as in the breathing zone, as well as stationary for up to two hours at up to 5000 ml/min for mold measurement. The SG5200 measuring devices are easy to operate and can generate a large volume flow range for measurement.
If there is a suspected risk from asbestos fibers, fibre measurements must be carried out. Such fibre measurements for asbestos fibres can be carried out using our SG12 measuring devices for asbestos measurement.
The media can no longer imagine life without particulate matter pollution, but what is it and how dangerous is it for us? The debate flares up again on New Year’s Eve: does this mean the end of rockets and firecrackers?
If there is water damage or a damage pattern is already visible, a consultation with our GSA pollutant experts to test the mold infestation can be helpful.
A professional determination of the infestation using special measuring devices for testing mold infestation can be relevant and recommended in the event of financial claims.
Please feel free to contact us on this topic.
Our SG12 measuring device can be used to carry out fibre measurements in the event of potential health risks from asbestos. The measuring device SG12 is suitable for fibre measurements of asbestos fibers indoors.
If exposure to asbestos fibers is suspected, an expert asbestos test is an advantage. We will be happy to answer any further questions you may have.
A wood preservative test is advisable if a health hazard is suspected. The GSA measuring device PM4-2 is recommended for a wood preservative test.
The measuring device PM4-2 can provide meaningful measurements due to its relatively high air flow rate, even at locations with low levels of pollution.
After the wood preservative analysis, you can be sure whether there is a potential risk to health. Our measurement technicians will be happy to create a customized measurement concept for you.