Measuring devices Archive - Page 6 of 9

GSA room air measuring devices detect solvents

30. April 202513. March 2020 by s.abels

GSA SG350ex, SG5200 and SG5100ex room air measuring devices for sampling solvents

GSA indoor air measuring devices reliably detect the presence and harmful quantities of solvents in the home. If, for example, an unpleasant odor develops in the course of new furniture or other furnishings, or if symptoms only occur in one room, there may be solvent pollution.

The GSA measuring device SG350ex is particularly suitable when it comes to escaping gases. These room air measuring devices therefore provide more information about the gases present in the room under investigation.

Measure mold with SG5200

30. April 202521. February 2020 by s.abels

SG5200 measuring devices to precisely measure mold

The measuring device SG5200 can be used to measure various hazardous substances, including mold. The SG5200 can be used both for personal sampling, such as in the breathing zone, as well as stationary for up to two hours at up to 5000 ml/min for mold measurement. The SG5200 measuring devices are easy to operate and can generate a large volume flow range for measurement.

Asbestos measurement often necessary

30. April 202517. January 2020 by s.abels

Asbestos measurement for suspected asbestos fibers

If there is a suspected risk from asbestos fibers, fibre measurements must be carried out. Such fibre measurements for asbestos fibres can be carried out using our SG12 measuring devices for asbestos measurement.

Fibre measurements of asbestos fibers

2. May 20251. December 2019 by s.abels

Fiber measurements of asbestos fibers with GSA measuring device SG12

Our SG12 measuring device can be used to carry out fibre measurements in the event of potential health risks from asbestos. The measuring device SG12 is suitable for fibre measurements of asbestos fibers indoors.

If exposure to asbestos fibers is suspected, an expert asbestos test is an advantage. We will be happy to answer any further questions you may have.

Wood preservative test with PM4-2

2. May 202519. November 2019 by s.abels

Wood preservative test with GSA measuring devices PM4-2

A wood preservative test is advisable if a health hazard is suspected. The GSA measuring device PM4-2 is recommended for a wood preservative test.

The measuring device PM4-2 can provide meaningful measurements due to its relatively high air flow rate, even at locations with low levels of pollution.

After the wood preservative analysis, you can be sure whether there is a potential risk to health. Our measurement technicians will be happy to create a customized measurement concept for you.

Measure asbestos fibers with SG12

2. May 202531. October 2019 by s.abels

Measure asbestos fibers with measuring device SG12 to determine health hazards

The measuring device SG12, specially developed for asbestos measurement, can be used to precisely measure even very low concentrations of asbestos fibers. It is suitable for sampling inorganic fibrous particles in accordance with VDI 3492 and ISO 14966 as well as asbestos or AMF. It can also be used to measure the various dust fractions such as A-dust or E-dust.

An analysis of asbestos is then carried out to determine the concentration of this hazardous material in the building.

If it is suspected that material containing asbestos was used in the construction of buildings, a measurement is advisable.

The GSA Messgerätebau GmbH manufactures its own suitable measuring devices for measuring hazardous substances. In addition, every asbestos hazard situation is unique. For this reason, we are happy to develop a suitable measurement strategy for sampling asbestos for you.

Measuring dioxins with GSA measuring devices PM4-2

2. May 202520. September 2019 by s.abels

Measure dioxins with GSA Gravikon PM4-2

If dioxin contamination is suspected, a dioxin measurement should be carried out promptly. Our PM4-2 measuring devices are suitable for measuring dioxins, PCDDs and other dioxin-like compounds. With these measures, dangerous occurrences of dioxin contamination can be tested very accurately in order to precisely verify possible suspected cases.

To develop the optimum measurement concept, please contact us, our measurement engineers will be happy to advise you.

Testing mold infestation

2. May 202513. September 2019 by s.abels

Testing for mold infestation is often a necessity

In order to obtain clarity about a mold infestation situation, a precise analysis of the mold infestation should be carried out. In addition to self-testing, a professional analysis after testing can provide precise results that often initiate further important measures. GSA Schadstoffanalytik carries out this precise analysis after sampling for mold infestation testing.

Testing heavy metal exposure with GSA measuring devices SG10-2A and PM4-2

3. May 202531. August 2019 by s.abels

GSA measuring devices SG10-2A and PM4-2 determine the heavy metal load

If there is a risk of heavy metal exposure at the workplace, it often makes sense to test for heavy metal exposure. It is important to consider a few points in advance. Our GSA measuring devices SG10-2A or PM4-2, for example, are suitable for this purpose.

These devices can be used to measure the particle measurements of the dust fraction of A-dust and/or E-dust.

Measuring of harmful substances

10. March 20255. August 2019 by s.abels

Measuring device SG5100ex for measuring of harmful substances

When storing pollutants, a release of the substances is always possible and requires regular monitoring as part of occupational safety, such as measuring of harmful substances.

Measuring of harmful substances with GSA measuring device SG5100ex

Precise measuring of harmful substances can be carried out by the GSA Messgerätebau for gases, for example. Our measuring device SG5100ex is recommended for this, as it is equipped with explosion protection.