If there is a suspected risk from asbestos fibers, fibre measurements must be carried out. Such fibre measurements for asbestos fibres can be carried out using our SG12 measuring devices for asbestos measurement.
The media can no longer imagine life without particulate matter pollution, but what is it and how dangerous is it for us? The debate flares up again on New Year’s Eve: does this mean the end of rockets and firecrackers?
Our SG12 measuring device can be used to carry out fibre measurements in the event of potential health risks from asbestos. The measuring device SG12 is suitable for fibre measurements of asbestos fibers indoors.
If exposure to asbestos fibers is suspected, an expert asbestos test is an advantage. We will be happy to answer any further questions you may have.
A wood preservative test is advisable if a health hazard is suspected. The GSA measuring device PM4-2 is recommended for a wood preservative test.
The measuring device PM4-2 can provide meaningful measurements due to its relatively high air flow rate, even at locations with low levels of pollution.
After the wood preservative analysis, you can be sure whether there is a potential risk to health. Our measurement technicians will be happy to create a customized measurement concept for you.
If dioxin contamination is suspected, a dioxin measurement should be carried out promptly. Our PM4-2 measuring devices are suitable for measuring dioxins, PCDDs and other dioxin-like compounds. With these measures, dangerous occurrences of dioxin contamination can be tested very accurately in order to precisely verify possible suspected cases.
To develop the optimum measurement concept, please contact us, our measurement engineers will be happy to advise you.
In order to obtain clarity about a mold infestation situation, a precise analysis of the mold infestation should be carried out. In addition to self-testing, a professional analysis after testing can provide precise results that often initiate further important measures. GSA Schadstoffanalytik carries out this precise analysis after sampling for mold infestation testing.
28.04. is the World Day for Safety and Health at the Workplace.
This day was established in 1984 by the International Labor Organization (ILO) with a focus on prevention. The aim is to show that most accidents at work are avoidable. The protection of employees is particularly emphasized on this day, as better prevention not only protects health, but also saves costs. Every year, this day has a different motto.
If health problems occur after a renovation, such as headaches, dizziness or similar, it is reasonable to suspect that this could be due to VOC exposure.
To verify this, an indoor air measurement can be carried out with our SG350ex measuring device. If larger volume flows are required, the SG5100ex or SG5200 measuring devices can be used.
It is difficult to recognize mould infestation at first. In some cases, mould infestation must be measured in order to identify potential hazards. As soon as you notice characteristic features, the infestation is often already well advanced. These include visible discoloration (white/green/black/yellow areas) or the typical “musty” smell, which quickly returns even after intensive ventilation.
